G2RG-2A-X DC12

G2RG-X PCB Power Relay Power Relay with 500 VDC 10 A Switching Capacity (2 poles series wiring with 3.0 mm contact gap) • Achieves 500 VDC 10 A switching capacity used with 2 pole series wiring • 3.0 mm contact gap (2 poles series wiring) • Offers high insulation with insulation distance above 8 mm and impulse withstand voltage of 10 kV between coil and contacts. • UL and TÜV certified RoHS Compliant ■Model Number Legend ■Application Example • Energy storage system G 2 R G - 2 A@ -X —— — 1 2 3 1. Number of Poles 2. Contact Form 3. Enclosure rating 2: 2-pole A: N.O. contact Blank: Flux protection DPST-NO (2a) ■Ordering Information ■Characteristics Contact form Enclosure rating Terminal type Model DPST-NO (2a)* Flux protection PCB terminals G2RG-2A-X Rated coil Minimun voltage packing unit 12 VDC 24 VDC 60 pcs/tray Note. When ordering, add the rated coil voltage (V) to the model number. Example: G2RG-2A-X DC12 Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packing will be marked as @@ VDC. * This product is designed and manufactured under the assumption that it will be used with 2 poles series wiring. Contact resistance *1 100 mΩ max. Operate time 15 ms max. Release time Max. switching frequency Rated voltage Rated current (mA) 12 VDC 66.6 180 24 VDC 33.3 720 80% max. 10% min. 110% (at 23°C) Approx. 800 Note 1. The rated current and coil resistance are for a coil temperature of 23°C and have a tolerance of ±10%. Note 2. The operating characteristics given in the above table are for a coil temperature of 23°C. Note 3. The maximum allowable voltage is the maximum possible value of the voltage that can be applied to the relay coil. ●Contacts (2-pole Series Wiring) Item Load Resistive load 18,000 operations/hr Electrical 1,800 operations/hr Between coil and contacts 1,000 MΩ min. 5,000 VAC, 50/60 Hz for 1 min Between contacts of 3,000 VAC, 50/60 Hz for 1 min different polarity Between contacts of the same polarity ●Coil Must-operate Must-release Maximum Coil Power voltage voltage voltage resistance consumption (V) (V) (V) (Ω) (mW) % of rated voltage 5 ms max. Mechanical Insulation resistance *2 Dielectric strength ■Ratings Item 1,000 VAC, 50/60 Hz for 1 min Impulse withstand voltage 10 kV (1.2 x 50 μs) Insulation distance Between coil and contacts Clearance: 8 mm, Creepage: 8 mm Destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Destruction 1,000 m/s2 Malfunction 200 m/s2 when energized Mechanical 1,000,000 operations min. (at 18,000 operations/hr) Electrical *3 (When resistive load and 2 poles series wiring) 10,000 operations at 500 VDC 10 A 30,000 operations at 500 VDC 1 A (switching frequency of 1,800 operations/hr) Vibration resistance Shock resistance Durability Contact type Single Contact material Ag-alloy (Cd free) Rated load 10 A at 500 VDC Ambient operating temperature -40 to 85 °C (with no icing or condensation) Rated carry current 8A Ambient operating humidity 5% to 85% Weight Approx. 22 g Maximum switching voltage 500 VDC Maximum switching current 10 A G 2 R G I X Note. The above values are initial values (at an ambient temperature of 23°C.) *1. Measurement conditions: 5 VDC, 1 A, voltage-drop method. It is a value between each contact terminal. *2. Measurement conditions: Measured with a 500 VDC megohmmeter at the same places as the dielectric strength. *3. A diode and zener diode are connected to the relay coil. 1 G2RG-X PCB Power Relay ■Dimensions CAD Data Please visit our website, which is noted on the last page. G2RG-2A-X 23.5 max. (22.8)* 29 max. (28.6)* PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm 13.5 max. (12.8)* 8.6 (Unit: mm) 5 Terminal Arrangement/ Internal Connections (Bottom View) (+) Six, 1.3-dia. holes 1 3 4 8 6 5 7.5 29.5 max. (28.5)* (-) 17.2 (2.1) 0.5 3.5 0.3 0.2 1 1 * Average value 20 The contacts have polarity. Exercise caution. Use this product with 2 poles wiring series. (No coil porality) CAD Data ■Approved Standards The approved rated values for international standards are different to the individually specified characteristic values. Be sure to confirm that required standards are satisfied before actual use. UL Recognized: (File No. E41643) G Model Contact form Coil ratings Contact ratings 2 10 A, 500 VDC (Resistive) 85°C R G2RG-2A-X DPST-NO (2a) 12, 24 VDC G 1 A, 500 VDC (Resistive) 85°C I X EN/IEC, TÜV Certified Model (Approval/No. R50468711) Model Contact form Coil ratings G2RG-2A-X DPST-NO (2a) 12, 24 VDC Contact ratings 3 4 8 6 5 10,000 30,000 (-) Note. The contacts have polarity. Exercise caution. The diode and zener diode are for coil surge absorption. (The coil has no polarity.) 2 Number of test operations 1 A, 500 VDC (Resistive) 85°C Load (+) 10,000 30,000 10 A, 500 VDC (Resistive) 85°C ■Circuit Diagrams 1 Number of test operations G2RG-X PCB Power Relay ■Precautions ●Please refer to “PCB Relays Common Precautions” for correct use. ●Dropping Correct Use ●Differences with the G2R The G2RG-2A-X has the same terminal arrangement as the G2R-2A4 but the switching capacity and electrical endurance are different. Confirm that correct operation is possible in the actual operating conditions before using in applications. ●Handling The enclosure rating of this product is flux protection. Therefore, do not wash with water or detergent. ●Mounting The contacts of this product have polarity. Be sufficiently careful because incorrect wiring may result in a failure to break the circuit. This product is designed and manufactured under the assumption that it will be used with 2-pole series wiring. Do not use it with 1 pole only. Install the product in a dry location with little dust and corrosive gas. Use in high temperature and humidity or an atmosphere containing corrosive gas may lead to the relay itself failing or suffering burn damage caused by performance deterioration due to the influence of condensation or corrosive materials. Do not use this product if it has been dropped. ●Electrical endurance Since this product is specifically for high DC voltages, the final failure mode is failure to break the circuit, and in a worse-case scenario, burning may extend to surrounding components. Do not exceed the specified ratings or number of operations during use, or use the product for any application other than high DC voltages. Implement a safety circuit and other safety measures to minimize the risk in the event of a failure. The electrical endurance of this product is the number of load switching operations with a resistive load under the standard testing conditions specified by OMRON. The coil drive circuit, ambient environment, switching frequency, or load condition (use under an inductive load or capacitor load) may reduce the endurance and lead to a failure to break the circuit. Always confirm operation with the actual equipment. ●Connection of diodes to the operating coil Connect a diode and zener diode to the relay coil (refer to the following figure). The diodes are for coil surge absorption. Switching performance may be affected if only a diode is used, so use in combination with a zener diode. The coil has no polarity. Connect the diodes in the reverse polarity of the voltage applied to the coil. The recommended zener voltage of the zener diode is three times the rated coil voltage. Diode Relay Coil Zenor Diode Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2020 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. K333-E1-01 0720 (0720) 3 G 2 R G I X